Installation Guide – Whitewater Pro Shower Pan

3 Step Installation – Fast and Easy

  1. Clean subfloor where shower pan is to be installed. Dry fit shower pan into place and check for proper alignment with walls
    and drain. Make sure shower pan sets flat and level. If subfloor is not flat or level see Problems and Solutions.
  2. Prepare to secure the Shower Pan in place. Put 1” diameter dabs of silicone or other adhesive on subfloor every 6″ covering
    the total area of where the shower pan will set on the subfloor. This will help secure the pan to the floor.
  3. Put shower pan into final resting place by setting shower pan gently into adhesive make sure floor pan sits flat and level on
    subfloor.

Installation Video

shutterstock_109770068